Manual Call Point | Edwards EST Red Call Point
+ GST extra as applicable
The Edwards EST Red Call Point is a manual fire alarm initiation device designed to allow occupants to manually activate a fire alarm system during a fire emergency. Edwards EST manual pull stations are available in different configurations within the Signature Series, including single-action, presignal and double-action models.
The red, highly visible design helps users identify the manual fire alarm station quickly during an emergency. Depending on the selected model, the station may use a traditional pull-handle arrangement or a contemporary double-action design.
100% Genuine
Secure Checkout
Fast Delivery
The Edwards EST Red Call Point is a manual fire alarm initiation device designed to allow occupants to manually activate a fire alarm system during a fire emergency. Edwards EST manual pull stations are available in different configurations within the Signature Series, including single-action, presignal and double-action models.
The red, highly visible design helps users identify the manual fire alarm station quickly during an emergency. Depending on the selected model, the station may use a traditional pull-handle arrangement or a contemporary double-action design.
An Edwards EST Red Call Point, also commonly called a manual pull station or manual fire alarm station, allows a person to manually initiate a fire alarm when a fire or other emergency condition is observed.
Edwards' Signature Series manual pull stations include the SIGA-270, SIGA-270P and SIGA-278 models. The SIGA-270 family uses the familiar teardrop-style design, while the SIGA-278 uses a contemporary design with a red Lexan housing and double-action operation.
|
Model |
General Configuration |
Housing / Design |
Operation |
|
SIGA-270 |
Signature Series manual pull station |
Die-cast zinc, red finish |
Single action |
|
SIGA-270P |
Presignal manual pull station |
Die-cast zinc, red finish |
Presignal / two-stage application |
|
SIGA-278 |
Signature Series manual pull station |
Red Lexan |
Double action, single stage |
The exact functionality, installation requirements and system compatibility should be verified against the specific model selected.
The SIGA-270 features Edwards' traditional teardrop-style manual pull-station design. Edwards documentation describes the station as being made from die-cast zinc with a red epoxy powder-coat finish and aluminum-coloured stripes and markings.
The single-action mechanism is activated by pulling the handle, which breaks the glass rod and initiates the alarm condition.
The SIGA-270 is part of the Edwards Signature Series and is intended for compatible Signature Series fire alarm systems.
The SIGA-278 is the contemporary-style manual station in the Edwards Signature Series range. It uses a durable red-coloured Lexan housing.
Its double-action operation requires the user to first lift the upper door and then pull the alarm handle. This two-step operation can help reduce accidental activation in suitable applications.
The SIGA-270P is a presignal version designed for applications requiring two-stage operation. Edwards documentation identifies a general alarm key switch for this configuration.
The exact fire alarm sequence and system response depend on the fire alarm control panel programming and project configuration.
A manual call point provides a direct way for a person to initiate a fire alarm.
In a typical sequence:
For an addressable Signature Series installation, the manual station communicates with the compatible Signature system and can be individually identified by the fire alarm control system.
The Edwards Signature Series includes intelligent manual pull stations. Edwards describes these intelligent pull stations as devices with integral microprocessors that improve communication and fire alarm control-panel response.
This makes the correct system compatibility particularly important. A Signature Series manual station should not be treated as a universal manual call point for every conventional or addressable fire alarm panel.
Because “Edwards EST Red Call Point” refers to a product family rather than one unique model, exact technical specifications should be confirmed from the model number.
|
Specification |
Details |
|
Product Type |
Manual Fire Alarm Call Point / Pull Station |
|
Brand |
Edwards / EST |
|
Series |
Signature Series, for applicable models |
|
Colour |
Red |
|
Models |
SIGA-270, SIGA-270P, SIGA-278 and applicable variants |
|
System Type |
Intelligent/addressable for Signature Series models |
|
Activation |
Single action, presignal or double action depending on model |
|
Housing |
Model dependent |
|
Communication |
Edwards Signature system, where applicable |
|
Addressing |
Electronic addressing for applicable intelligent models |
|
Mounting |
Model and installation configuration dependent |
|
Operating Voltage |
Model/system dependent |
|
Operating Temperature |
Model dependent |
|
Humidity |
Model dependent |
|
Certifications/Listings |
Model dependent |
Important: Do not publish one voltage, current, IP rating or certification as a specification for every Edwards EST red call point. These values must be checked against the exact part number.
Edwards EST manual call points can be used in fire alarm installations across:
Manual call points are generally positioned at accessible locations where occupants can quickly operate them during an emergency, subject to the applicable fire alarm design and local requirements.
Compatibility is one of the most important factors when selecting an Edwards EST manual call point.
Before ordering, verify:
Edwards maintains separate conventional and intelligent initiation product ranges, so the phrase “Edwards call point” alone is not sufficient to establish system compatibility.
The red colour and manual activation mechanism make the Edwards EST call point readily identifiable as a fire alarm initiation device.
For projects using Edwards Signature intelligent systems, selecting the correct Signature manual station can provide integration with the intelligent fire alarm architecture. Edwards states that its Signature manual pull stations are available in both single-action and double-action formats.
A manual call point should be installed according to the manufacturer's installation instructions, approved fire alarm design and applicable local codes.
Important considerations include:
Installation and commissioning should be carried out by appropriately qualified fire alarm personnel.
Edwards provides a range of manual fire alarm initiation devices for conventional and intelligent fire safety systems. The Signature Series offers different manual station configurations to meet different operational requirements, including traditional single-action, presignal and double-action options.
For replacement projects, identifying the exact existing Edwards model is important because visually similar manual stations can have different operating mechanisms and system compatibility.
An Edwards EST Red Call Point is a manual fire alarm initiation device that allows an occupant to manually activate a compatible fire alarm system during an emergency.
The Signature Series manual pull stations, including models such as SIGA-270 and SIGA-278, are designed for intelligent/addressable Signature Series systems. The exact model and system compatibility should be verified before installation.
The SIGA-270 uses Edwards' traditional teardrop-style design and single-action pull operation. The SIGA-278 is a contemporary-style red Lexan station with double-action operation.
SIGA-270P is a presignal version of the Edwards manual pull station intended for applications requiring two-stage operation. Edwards identifies a general alarm key switch as part of this configuration.
Edwards offers both conventional manual initiation devices and intelligent Signature Series devices. The exact call point must therefore be matched to the fire alarm control panel and system architecture.
The SIGA-278 is a double-action, single-stage manual station. The user first lifts the upper door and then pulls the alarm handle.
Red provides high visual recognition for fire alarm equipment and helps occupants quickly identify the manual alarm initiation point during an emergency. The exact colour and marking requirements should follow the applicable local standards and project specification.
No. Edwards manual stations are system-specific. Signature Series intelligent manual stations should be used with compatible Signature architecture, while conventional products require compatible conventional fire alarm systems.
First identify the existing fire alarm control panel and the exact existing call-point model. Then select the required operation—single action, double action or presignal—and verify electrical, mounting and approval requirements.
Looking for an Edwards EST Red Call Point / Manual Pull Station for a new installation or replacement requirement?
DNG Fire Engineering can assist with product identification and supply based on your fire alarm system requirements.
For the most accurate selection, share the existing Edwards model number or a clear product photograph, along with the fire alarm control panel model.
Request a Quote for Edwards EST Red Call Point
For replacement projects, matching the existing model and system compatibility is recommended before placing an order.
Dispatch Time: Orders are typically processed and dispatched within 24-48 working hours upon successful payment confirmation via our secure gateway.
Delivery: We offer Pan-India delivery via secure logistics partners. Transit time is generally 3-7 business days depending on the location.
Returns: Defective items can be returned or exchanged within 7 days of delivery subject to our standard inspection and return policy. Please contact our support team to initiate a return request.